yah these clutch bolts are very touchy, i have done this several times, always use a small torque wrench when tightening & go very slow, (1 revolution = 1 minute) after hand tight.
__________________
1985 LT250R Quadracer
Manufacture Date: 12-84
+8mm Hot Rod
FloTek Drag/Dune port w/ Head Mod
LA Sleeve
STD Weisco Piston
AAEN Pipe
1Dirracing Ported Reed Block w/ Secrets
Keihin 39mm PWK
Nology Pro Fire Coil & HotWires
7oz off FlyWheel
Barnette Kevilar Clutch Kit
UNI filter
+2 +1 Chrome Burgard A-Arms
+4 Chromoly Swingarm
WORKS Fronts w/ Rezzys
DuraBlue Rear Strut
Billet Twin Row Carrier
LSR Axcaliber +2 Axle & LSR Brake Hub
"If your not scared, your not safe" |