Thread: Spanner wrench
View Single Post
  #1 (permalink)  
Old 03-01-2008
1upfront's Avatar
1upfront Offline
Dirt Dragster!!

 
Activity Longevity
6/20 7/20
Today Posts
ssssss601
Join Date: Mar 2007
Location: Ohio
E2S Coin: 3,530
Classified Rating: 0% (0)
1upfront is an unknown quantity at this point
Default Spanner wrench

I made this with a 1/4 inch piece of steel, a cut off wheel, die grinder, drill, angle grinder and a half round bastard. I used a spare bearing carrier and traced the shape onto a piece of thick paper then I drew the rest of the tool around it, after cutting the shape out of thick paper I carefully scribed the shape onto the steel and used the above tools to finalize the shape, it took a couple of hours lots of patience and a shoe full of metal shavings.


__________________
My 84 300R Dragtrike
Hondaline 300r Kit
Oldschool Cobra Pipe And Silencer
Vforce3 Reeds
Intake Spacer
FL350 Intake Boot
39mm PWK
Uni 2 Stage Open Filter
Flotek Lightened Flywheel
Flotek Port & Deck mods
Flotek Head Mods
Wiseco 76.44mm Piston
Mitaka Billitt Hybrid Clutch
NGK Spark Plug
Maier Plastics
AussieDuner tank scoops
Durablue +2 Swinger
DG Alloy Grab Bar
Maxxis 4 Snow's In Back
Hand Shaved Front Smoothie
Regina O-ring Chain
110 Octane & Amsoil Dominator
Reply With Quote
Sponsored Links