 What do ya think?
I noticed some people talking about different drag quads. My best friend, a fellow hillclimber, his dad is building a drag quad to beat all others. They bought a blaster and took the engine out. Then they picked up a Kawasaki H2 750 triple motor. That's a 750cc, triple cylinder, 2 stroke engine. They have the engine mounted in the frame from a machine shop. The engine is rated to go 180 mph in the blaster frame. The swingarm is extended 6 inches already from being a past hillclimb quad, and they are going to kick the axle out and kick the a-arms out. They are going to hillclimb, sand drag, flat track, and also try it out on the 1/4 mile. Just wondering what you guys think of this and if you have any ideas for the project. Also, the tampon sticker is going to be used on this quad.
__________________
VERTICLE LIMIT RACING
2000 Yz 250
Stretched 7-15 in.
Pro Circuit Pipe and Silencer
Excel Rims
Pro Taper bars
GYTR triple clamps
V-Force 3 reeds
Hot Rods, Crank assembly
Head Milled for compression
Hinson Clutch basket and Pressure plate
Wiesco Piston
UNI Pod filter
ASV Unbreakable levers(clutch broken 3 times)
IRC M5B---switched to an AMS paddle for the mud n snow
-- In the process of the bottom end bein rebeefed.
--built a 1641 hillclimb buggy, friend with 2110 fuel injected on the way
-go cart
-kawasaki 340cc snowmobile engine
|