Well i fixed the problem with the drag, i filed the basket grooves down a little. But I get some vibration like a rattle from the clutch when it idles
, but as soon as i squeeze in the clutch it goes away. release the clutch and the rattle comes back. I don't get it,
It goes into gear fine and works perfect. but i know that rattle isn't supposed to be there when the clutch is released. Could that be caused by the thrust bearing or are the clutch and springs shot? I cant tell in my manual which way the thrust bearing goes. Anyone know from these pictures? I installed it like in picture 1
I miched the springs and the service limit said 31mm. Mine are at 30mm.
wonder if that would cause it to rattle