There are two circlips one on each side. use a small scrwdriver or pick to remove either of them. then use a socket that is just the right side to slide into the pin hole in the piston. slightly tap the socket unitll the pin starts to move. The circlips are the hardest part of the while ordeal.
__________________
1985 LT250R Quadracer
Manufacture Date: 12-84
+8mm Hot Rod
FloTek Drag/Dune port w/ Head Mod
LA Sleeve
STD Weisco Piston
AAEN Pipe
1Dirracing Ported Reed Block w/ Secrets
Keihin 39mm PWK
Nology Pro Fire Coil & HotWires
7oz off FlyWheel
Barnette Kevilar Clutch Kit
UNI filter
+2 +1 Chrome Burgard A-Arms
+4 Chromoly Swingarm
WORKS Fronts w/ Rezzys
DuraBlue Rear Strut
Billet Twin Row Carrier
LSR Axcaliber +2 Axle & LSR Brake Hub
"If your not scared, your not safe" |