View Single Post
  #1 (permalink)  
Old 05-05-2008
oldschoolzuk's Avatar
oldschoolzuk Offline
Junior Member

 
Activity Longevity
11/20 4/20
Today Posts
ssssss262
Join Date: Jan 2008
Location: ct
E2S Coin: 70,876
Classified Rating: 0% (0)
oldschoolzuk is on a distinguished road
Thumbs up Full Flight A arms ... Good deal...

I have had my full flight installed now for about 60-70 hours of trail sand and jumping time and they are holding up great.I bought them on E bay for $365 and they came complete with heim joints and spacers and everything you need to install them.I had to use bronze bushings at the frame mounting point due to the spacers were about 3/8s to short.Easy fix.This past sunday I was flying through a tight trail and my left front tire snagged a tree which stopped the quad dead in its track.I went over the bars and was sure I had seriously messed up the front end.I checked everything over and the arms and heim joints are fine.Not bent or loose at all.My asr 5/8s tie rod got bent but that was all the damage it got.Alot of people are concerned with the alloy heims but they are very strong and will hold last .You can buy chromoly heims from full flight also.So for anyone concidering buying full flight arms they are way better than stock and you can adjust them with 12 points to fine tune a tweaked frame or camber and toe in etc.......Well worth the money.........................
__________________
1988 trx 250r
new 88 frame
rpm dominator 2 + 4 axle
burgard +2+1 front a arms
86 style extended swing arm
billet carrier
full LRD race pipe and silencer
new 295 cc bore and ct national ported and polished cylinder
hinson basket and barnett plates
stainless lines and ebc pads
douglas .190 wheels . itp holeshots and razors
ac nerfs. maier race cut plastics

My fellow americans it is due time we start the 2 stroke revolution........................................ ............
Reply With Quote
Sponsored Links