Hey all new to the site but not new to 2-strokes. I am in the process of tearing down a 86 250R and I went to order the crank bearings from a company called
www.psep.biz . I opted to just buy the bearings and not the bearing kit due to the fact that I already have the seals but at the bottom where you can buy just the bearings there is only one listed and the 500 has two listed one for right and one for left. on the 250 are both sides the same bearing?? Also before I split my cases my reason for tearing down the machine was due to a sort of rolling noise in the bottom end, It ran perfect though. Should I continue to believe its crank bearings even though the previous owner said there was 10 hours on it? Could it be just the balancer, if so how do I check. Thanks y'all