Who's going to Trikefest at Haspin Acres

[Daddio]

Here is the Kamikaze cylinder. It has a hair over 1mm of sleeve left on the top and 3.5mm on the skirts. I had to remove the bridge on the intake port because it was so thin after it was bored that it would have just caused problems if it was left in.

[flotek]

you did a good job blending on the intake after the bridge was removed i would have removed it when i ported it had i known there would be an issue . wha t was it like 3 or 4 mm over bore..cause i forgot . that should be a potent little runner too

[Daddio]

It's 5.5mm over stock. I still have to smooth out around the ports. The guy that bored it didn't do any of that after he bored it. Probably because it took four passes to get it bored enough. Oh well I better get started we want to take it out tomorrow and see what it's made of.

[Daddio]

We just put the clutch rod back in the 300r and it feels right finally. When we first put it together it took every bit of adjustment it had to even get a little action out of it. We measured the thickness of the new style discs and steels then measured the stock ones and discovered that the new ones are 2.5mm thicker. So I added 2.5 mm to the clutch rod. Now that one's ready for a little torture testing tomorrow also.

[Daddio]

Hey Denny here is a picture of the clutch in the trike. He didn't take it out but in the driveway it felt real smooth. The kamikaze was started and runs. It's so freaking hot today we decided to wait until tomorrow to ride it.

[flotek]

pic didnt show up ????????

[Daddio]

Originally Posted by flotek

pic didnt show up ????????

Sorry, I forgot to post it. I think my brain is a little fried from the heat today.

[flotek]

sweet setup lets hope it holds up under load to kick some butt at trikefest egear to hear how the play 250 runs might wanna get some beefy springs ofr it too

[Daddio]

Well some people are already there and more are on the way. We will be heading out Thursday. Everyone that lives close to Laurel, Indiana should come out for the party and fun if nothing else.

[1upfront]

Ok I'm back and i got some vids they kinda rushed the drags because of weather delay and they ran single eliminations but I got 3rd in the mod class on the 300r I'll start the vids back to front first vid is me racing two different bikes ones a sprock 84 300r and the other is a 310 that eliminated me barely due to a wheelie on the start i had to back out of, I'm in the far lane the first race and the close lane the second.

Heres me in the close lane beating a sprock 330 tri-z dragtrike.

I finally got the 300r dialed in good while I was there and let me tell you denny turned this thing into an animal!