Well I figure while I'm waiting on my jug I'd get everything else done.
I installed my Digitron gauge. These gauges are universal and not bike specific so it took a lil' thought. I mounted it on my bars with a plate I made from aluminum. I cut a section out of the sidewall from an old tire and rubber mounted it. I used the thick side of the rubber on top to give me a better angle towards my eyes.
I mounted my MPH sensor on the swinger and positioned it to pick up the studs on my sprocket spider. I mounted my EGT sensor 6 inches from the piston using my old jug as a guide.
The tach sensor is plug n play and snaps on the spark plug wire and the cylinder head temp sensor mounts on the base of the spark plug.
All the hard stuff is done now it's a matter of connecting the wires.
MPH sensor
Rubber mounted
close look
Shes almost done!
That Socket17's custom +2 grab bar lookin nice!
