ya my dg style bills pipe pulled alot harder on the bottom and mid then the dam lrd i tried on the same motor and setup
the bills pipe i had was only made for 2 years but it was a hot pipe to have
the expansion chamber was as fat as my pt elimantor pipe maybe even more and it had the curves or a atc pipe so it gave good low end and snappy mid punch
i did alot of trail riding and sand dune climbing and the low end comes in handy
__________________
86 TRX250R
86 cases with 88 style hot rods crank
fresh seals and main bearings
68mm bore with wiesco 86 style piston
ported cylinder
stock head
.190 spacer plate kit from ESR
boysen reeds
pt elimantor pipe
36mm pj
k&n filter with no airbox
|