mxing a shee???

[bigbadbubba]

can any one put a list of parts up and prices and brands to have a mx shee? cause i think i want one still insted of a 450

[zillaguy89]

Lonestar racing banshee frame with 250R suspension geometry....haha

[Foshezy]

It really depends what level your in, cripes you could take a stock she in run at a amature leveel if you wanted to... You got to start somwhere... If i were you id try finding like a nice 02'ish shee with pipes, and in nice shape for around $3000... Then play with your suspension and just continue adding money to it as you get into high skill levels......... You could probably even find a 98'ish Shee for around 2000 bones with alot of aftermarket parts... Id deffinatly start with a suspension though, then move onto, pistons and porting and polishing and a dyna and axles and arms,, you get the gist
bry

[Foshezy]

Oh and id definatly go with the Shee, be unique.... Everyyones running the 450's because ther allready pretty much ready to go, but you going to be paying for it and you going to look like everyone else with they'r 4 jokes....Get the shee for cheap and put a couple bucks into it is what id do

[bones85]

Yeah...pretty much a good port and polish, maybe a PVL ignition, Roll Design Lobo II suspension with Elka quad rate ZPS Comp and Rebound adjustable shocks up front, prolly dual rate Elka rear with a -1" Roll Design or Lonestar swinger, good holeshot or Razr mx tires with Hiper Carbon fiber beadlocks, Cool head, 34mm Pwk's with K&N's, Either Toomey T-5's or FMF Fatties.

[fast350]

i run fullflight a arms and works and it is less hard on the pocketbook