foot peg help

[krazzykustoms]

well i was able to completly f' up my foot pegs...bolt holes are waddled out..what would be a good fix?..just weld some bars like on a drag frame for pegs? an i have oof pipes..any ideas?

[krazzykustoms]

pics would also help

[mxrobert01]

do you have nerf bars?

[krazzykustoms]

nope its a drag bike

[mxrobert01]

Well, i would have suggested drilling and tapping the holes to the next size up but, since its a drag bike the quicker way to fix is welding some on. Sorry but im not really sure on what you need

[bfulton620]

well... i had this kawasaki mojave witch was a family beater quad. anywho.... the bolt on the right side foot peg snapped one time, i pulled it, and it snapped again(forgot to use hardened steel). then when i was fixing it the 3rd time, the trheads stripped out. so i had it healiacoil. the heliacoil stripped out 2 different times. i even had it done in the machine shop at my work. it was realy legit! anyways..... i finaly ended up welding it! never had another problem. i got no ideas for ya. but welding is the best bet from my experience....

[krazzykustoms]

havent really noticed..always just took them off..but can you take the motor off if their welded?

[dem3500]

just weld the hole shut and then re drill and tap to the same size. should work no problem

[ky 2stroker]

Originally Posted by dem3500

just weld the hole shut and then re drill and tap to the same size. should work no problem

yea drilling through weld and easy out's is about impossible.unless the moons align and everything turns into darkness.

[mxrobert01]

thats why you tap to the next size up^^^^^^