blaster/banshee rear brake conversion?

[oluseyi]

Is there anyone out there that knows of a detailed step by step layout of how to replace the manual blaster rear brakes with a hydro set up off of a 01 banshee?

If so could you please reply. THANK YOU IN ADVANCE!!!!!!!!!!!!!!

[oluseyi]

Is there no one who could respond?

[ONLY2STROKES]

ther hydro rear brakes from almost anything can be swapped to a blaster rear.the banshee brakes would be a good choice ,im sure the line is long enough.you must fabricate your own brackets and such..a MIG welder and decent mechanical apptitude are required.i cannot provide detailed instructions though.

[oluseyi]

thanks alot, i just wanted to make sure b4 i made the purchase

[370banshee]

buy a carrier for a 03-06 blaster, brake hub and rotor from a banshee,

you'll need to weld a tab to mount the master cyl.

modify your brake pedal to work with a banshee master cyl.

other than that it's pretty cut and dried..

[ky 2stroker]

is the rear carrier for the 03+ blasters different? and can you not use the disc that goes with the mechanical brake?

[370banshee]

the rotor form the mech. brake is a floating rotor designed to work with a ridged mounted caliper. in any hyrdo brake setup the caliper flats on teh pins.. so your best bet is a solid mounted rotor...

and yes the 03-06 carriers for a blaster accept a bashee rear brake caliper... in 03 blaster got a brake upgrade and recieved front and rear hrydo brakes.. the brakes they got were banshee/raptor style brakes... in fact if you buy 03-06 frotn spindles and soem used banshee brakes you can build your own front hydro setup....