banshee axle?

[96blasterusmc]

well i've heard people of taking banshee axles and putting em on blasters? is it just the axle or the whole carrier or what and then what about the caliper will it line up or would i have to fabricate a bracket or spacer. just trying to get all of the info before i start lookin and if anybody has any pics of it to show me would help too

[Mert]

from what i understand the pre 03 axle's rotors line up and they should all fit in the blasters carrier, and i think it makes it +2 on each side

[Lake]

what about the 03+ blasters?

[DStad]

all i can say is try it

[bfulton620]

its gota be pre 03! wont work if its newer! i have done this modification on my blaster! axle, and caliper... its got hydrolic brakes in the rear now, and its 2" wider on each side! it works great! handles great! and stops great! i used the bearings that were already on the blasty, the axle slides right through!

[DEEBlaster88]

mine wont slide through and i went thru 4 screwed up months and its still sittin out the on blocks i tried to pipe then bang it out and i tried as hard as i could and that axle still wont come out the carrier... i need help i was suppose to had been traded wit a guy but its just been help up cuz i havent been able to pop taht axle out the carrier.

[Mert]

pb blaster, or some deep creer or also break free works very well, but it stinks really bad

[bfulton620]

Originally Posted by Mert

pb blaster, or some deep creer or also break free works very well, but it stinks really bad

\\yep1 he's right..... PB Blaster! that should do it! weird though, cause i have never done one that has been that hard? has it even moved at all? if you arent keeping the axle, take a sludge to one end! that should def get it out!!!!! are you sure your taking it off the correct side? you proly already know this, but it slided out the right side of the carrier!

[DEEBlaster88]

yeh man i took off the axle nut and all the tires off even the hubs only thing left is the rotor on it and that shouldnt be a problem i cant even get it to pop out from the carrier the bearings can still rotate the axle but the axle just wont slide out...

[PArider]

i am buying a lone stare +2 banshee axle used local , so ill give it a try and if i cant get it to work ill sell it on ebay ..