Float Adjustment

[ovrkild]

hey could someone tell me what the float on my blaster should be adjusted too. any info would be helpfull

[PA_Banshee]

my 05 blaster was pouring gas out of the vent tube over the weekend so I took it apart and found something very small just barely keeping it from sealing when the floats raise. I've never used a measurement when adjusting the floats I've just eyed it up and made sure that it sealed a little bit before the floats were at their maximum heigth.

[ovrkild]

same thing happened too me and i eyed it up but its been running like shit. i dont know it the float is staying full thanx for the advice

[PA_Banshee]

I thought it looked fine so I put it back together and it still did it. I took it back off and looked in really close and there was something just barely visible at the top where it seals so I tried to blow it out. I had to use a pick to get it out.

[ovrkild]

i got it set right and i noticed the valve was sticking. all good now. and i smoked a 250 four stoker

[flotek]

Originally Posted by ovrkild

i got it set right and i noticed the valve was sticking. all good now. and i smoked a 250 four stoker

good to hear