June 2008 2-Stroke OTM
Posted 10-09-2008 at 08:50 PM by 2-Stroke OTM
Let's a congratulate our long time supporting member Savage420. The Black 2001 Banshee Is Victorious!!!
He took a good jump ahead of the competition, poll is over and he's our June 2 Stroke Of The Month winner!!!
Chris, feel free to give us thestory how you came across your Banshee & step by step build.
Feel free to add more photography & some of your riding videos.
Banshee Mods: Toomey T5 Exhaust, Pro-Flo aluminum adapter plate with K/N clamp on, Black Laker plastic, ASV F3 forged "Shorty" clutch and brake Levers, Wiesco Prolites, Polished Noss cool head with 20cc domes, Pro design aluminum & with boost bottle, Cascade 1/2" intake spacers, V-Force 3 reeds and cages, Dual 30mm Flat slide carbs, Inline 20 fin cooler, Billet Iron cross pipe hangers, Pro Taper bars (high bend), Billet handlebar clamps, CRJ digital temp guage, Msr grips, Billet gas cap and anodized red breather valve, Esc brake pads, Key removed, 60 LED tail light, Trail Tech lights, Mod-Quad billet impeller, Mod-Quad Billet case saver, Tusk clutch plates and HD springs, Tusk fuel line, Tusk fuel filter, Tusk Anodized red shift lever, Ricky stator adjustable timing plate, Cascade shift star mod & Shift Pro shift kit, G-force Chromoly +4 axle & Locknut, Yfz450 A-arms modified with billet spacers for a banshee +2+1 (polished tops-silver-vien bottoms), Yfz450 front shocks, DMP Shock covers, Noss billet tie rods +2, ITP T9 Pro series Bajas (Front 10x5 3+2 offset) (Back 9x9 3+6 offset), Maxxis Razer 2 rear tires 20/11/9, Holeshot HD front tires 22/7/10, Custom flaming skulls grill waiting to be made, Ac Pro peg nerf bars with heel guards, Blingstar iron cross bumper, Primary drive sprockets 15/40, Pro Armour Skids, a-arms, engine ,swingarm, Polished clutch cover insert...
Below is a previous comment by Savage420:
Originally Posted by SAVAGE420
Here goes...
I was looking for a Banshee and found one in the Buy and Sell. . I went to take a look at it from a guy in Kelowna BC just a couple hours away and once I test rode it, I knew it was the one.
I didn't really have a plan as to what I wanted to do to my Banshee, I knew I wanted it to be faster, look nicer, and handle better. I started looking on ebay, banshee headquarters, and everything 2 stroke. I was amazed at all the shit you could do to Banshees'. I basically bought parts from all three sight. I started buying part after part after part, basically all on impulse buys, not knowing what I was going to end up with. If I see something I like for it I buy it with no hesitation. I'm not done adding more to my Banshee, but I'm pretty happy with as it sits right now. Ohhhh Boy......watch out for this winter's build!
I need new updated pics as i have posted basically all my good ones. I will have some killer pics when i get back from Sand Fest at Coos Bay Oregon in a bit here!!!
He took a good jump ahead of the competition, poll is over and he's our June 2 Stroke Of The Month winner!!!
Chris, feel free to give us thestory how you came across your Banshee & step by step build.
Feel free to add more photography & some of your riding videos.
Banshee Mods: Toomey T5 Exhaust, Pro-Flo aluminum adapter plate with K/N clamp on, Black Laker plastic, ASV F3 forged "Shorty" clutch and brake Levers, Wiesco Prolites, Polished Noss cool head with 20cc domes, Pro design aluminum & with boost bottle, Cascade 1/2" intake spacers, V-Force 3 reeds and cages, Dual 30mm Flat slide carbs, Inline 20 fin cooler, Billet Iron cross pipe hangers, Pro Taper bars (high bend), Billet handlebar clamps, CRJ digital temp guage, Msr grips, Billet gas cap and anodized red breather valve, Esc brake pads, Key removed, 60 LED tail light, Trail Tech lights, Mod-Quad billet impeller, Mod-Quad Billet case saver, Tusk clutch plates and HD springs, Tusk fuel line, Tusk fuel filter, Tusk Anodized red shift lever, Ricky stator adjustable timing plate, Cascade shift star mod & Shift Pro shift kit, G-force Chromoly +4 axle & Locknut, Yfz450 A-arms modified with billet spacers for a banshee +2+1 (polished tops-silver-vien bottoms), Yfz450 front shocks, DMP Shock covers, Noss billet tie rods +2, ITP T9 Pro series Bajas (Front 10x5 3+2 offset) (Back 9x9 3+6 offset), Maxxis Razer 2 rear tires 20/11/9, Holeshot HD front tires 22/7/10, Custom flaming skulls grill waiting to be made, Ac Pro peg nerf bars with heel guards, Blingstar iron cross bumper, Primary drive sprockets 15/40, Pro Armour Skids, a-arms, engine ,swingarm, Polished clutch cover insert...
Below is a previous comment by Savage420:
Originally Posted by SAVAGE420
Here goes...
I was looking for a Banshee and found one in the Buy and Sell. . I went to take a look at it from a guy in Kelowna BC just a couple hours away and once I test rode it, I knew it was the one.
I didn't really have a plan as to what I wanted to do to my Banshee, I knew I wanted it to be faster, look nicer, and handle better. I started looking on ebay, banshee headquarters, and everything 2 stroke. I was amazed at all the shit you could do to Banshees'. I basically bought parts from all three sight. I started buying part after part after part, basically all on impulse buys, not knowing what I was going to end up with. If I see something I like for it I buy it with no hesitation. I'm not done adding more to my Banshee, but I'm pretty happy with as it sits right now. Ohhhh Boy......watch out for this winter's build!
I need new updated pics as i have posted basically all my good ones. I will have some killer pics when i get back from Sand Fest at Coos Bay Oregon in a bit here!!!
Total Comments 1
Comments
 |  Oh sweet man, thanx for doing this. I have a ton of new updated pics AND vids also.... |
Posted 10-09-2008 at 09:41 PM by SAVAGE420  |
Recent Blog Entries by 2-Stroke OTM
- Jan 2009 "LT250 OTM" (01-02-2009)
- Jan 2009 "LT250 OTM" (01-02-2009)
- Dec 2008 "Sled OTM" (12-01-2008)
- Nov 2008 "Best Restoration OTM" (10-31-2008)
- June 2008 2-Stroke OTM (10-09-2008)
