34mm pj's jetting for a +4mil stroker?

[bansheeboy370+4]

I just want to know if anybody can recomend some jetting sizes for these 34mm pj keinen carbs? My motor has a drag port,Vforce3 reeds, k&n filters and a +4 mil stroker crank.Im in utah and i think the elvation is around 3500ft to 4000ft.Any help would be great,thanks!

[flotek]

Originally Posted by bansheeboy370+4

I just want to know if anybody can recomend some jetting sizes for these 34mm pj keinen carbs? My motor has a drag port,Vforce3 reeds, k&n filters and a +4 mil stroker crank.Im in utah and i think the elvation is around 3500ft to 4000ft.Any help would be great,thanks!

those stock needles in the 34pj suck ballz(cgl) yo u need to be at a size leaner needles ,liek a cj somethin i belive. id try a 150-155 main with 50 pilots ,that should be damn close.

[wesw]

Originally Posted by eviltwin

those stock needles in the 34pj suck ballz(cgl) yo u need to be at a size leaner needles ,liek a cj somethin i belive. id try a 150-155 main with 50 pilots ,that should be damn close.

denny knows nothing lol

joking

pj 34 come with ceg needles they are shit, get some dek, cek needles

the dek needles put more fuel in the mid compared to the cek,

as for your mains im at 140 at 900 ft so you should be 135 or lower i would say


basic jetting

55 pilot, dek 4th clip or 5th clip, 135 mains i would say 140 for sure but it should be rich

wes