Converting To Alcohol?

[fiveOnick]

Originally Posted by SMKMUPBANSHEE

what kind of oil would I have to mix with? And what ratio?

Klotz benol, 32:1. Never had a problem with that. 100% bean is the best way to go in my opinion for alky. There are several good oils though.

[MWC]

are there any adjustments that need to be made anywhere just to run race fuels?

[odaen]

compression and ignition timing will determine whether or not you need to run race gas.

[dirt11]

They make an oil just for methanol.Some brands already have it turbo blue and alky brands have it.and the piston thing it will melt down a piston easy if it is to lean.so "if your not sure give it more".i found that out the hard way in my 12,000 dollar racecar engine.it will also let engine run cooler.but being to lean is the main thing to worry about with alky.and carb wise alot is different as far as jetting and air that is why burn more than gas.everything is drilled out bigger.

[flotek]

alot of alky guys run Klotz @ around 32-1 ratios . your ignition timing will be higher and static compression too .5 o' Nick is the guy to talk too on this su bject

[fiveOnick]

Alky is much more forgiving than people think. Make the correct setup mods initially and you will love it. And yes Klotz Benol 32:1

[370banshee]

i used klota benol at 25:1 in my tri-z... never coudl get the alky thing down right... wrong carb and such.... gave up and switched to race gas.......