| ||||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| Sponsored Links |
| |
| |||||||||||
| I have a 2001 kx 250 and i just rebult the top end so thats good for now but i think i am going to tear it all down and try and make it look new again because it is pretty shady. its in gret shape but could use some cosmetic attention. there is a crack in the frame under the seat that someone alredy tried to weld it...ya "tried" not very hard!!!i will have to reweld that. if anybody has any sugestions like where i can get a matching pant for the frame. also needs new sprockets and chain, tires. The major project for the winter is new tran in the old camaro. ditchin the soft 700R4 for a rebuilt TH350 with a 3000 stall converter, then a set of 3.73:1 rear gears so i can still drive the thing on the high way, wont go very fast with the 4.11's i got in it right now........ |
| ||||||||||||
| I plan on working on the CR500LT. I also plan on replacing about every bearing on the LT other than the motor cause it only has about 30 hrs since last rebuild. Would like to do some powder coating but we will have to see and I hope to get my spare jug resleeved and put it on cause it is in better shape than the one on it right now. I will have to wait and see since I am going to be moving sometime this winter.
__________________ For Sale: 86 LT frame set up for a CR500 Motor Currently without a quad. E2S militia member--commander |
| ||||||||||||
| Gettin my Toomey pipes and going ridin on the local lake! Right now I dont got any money to get any more mods. But when I do Im gonna get an aftermarket cool head or some porting! And to fix stuff around the barn that broke.
__________________ E2S militia member |
| ||||||||||||
| Top end on the old DT250, and then figure out why it won't run right if this doesn't fix it. I figure its 30 years old, it needs a top end. Gonna ride the old 4-joke as much as possible, while trying to keep it as nice as possible, it is probably getting tossed aside for a banshee this spring if all goes well. =) |
| |||||||||||
| I don't know what all you guys have to do, but i know as long as my bike is stilll running, ill still be playing in the snow. That's can get pretty hairy on 2 wheels ... But most likely we'll prob have the buggy out pullin a couple sleds, or intertubes. We used trucks last year, so we're gonna find out if the buggy will pull it any better. You guys should try that, sled riding 50 to 60 mph on a tube behind a truck. Talk about some g force on the whips.. it's a lot of fun though.
__________________ VERTICLE LIMIT RACING 2000 Yz 250 Stretched 7-15 in. Pro Circuit Pipe and Silencer Excel Rims Pro Taper bars GYTR triple clamps V-Force 3 reeds Hot Rods, Crank assembly Head Milled for compression Hinson Clutch basket and Pressure plate Wiesco Piston UNI Pod filter ASV Unbreakable levers(clutch broken 3 times) IRC M5B---switched to an AMS paddle for the mud n snow -- In the process of the bottom end bein rebeefed. --built a 1641 hillclimb buggy, friend with 2110 fuel injected on the way -go cart -kawasaki 340cc snowmobile engine |
| ||||||||||||
| Thinking about doing a complete teardown to the frame....again. Think I'm gonna go the powdercoat way this time. The frame for sure. Mods, mods, mods......don't think I'll be doing performance mods this winter, just maintenance. Probably could use a complete bearing and seal replacement. Maybe the crank bearing boss fix. Oh yeah, I've got a stainless allen head bolt kit to put on..500pcs and a DYNA rev limiter. Just piddle with it.
__________________ 1999 BANSHEE Completely Stock |
| |||||||||||
| I'm going to pick up a suzuki lt160 Friday for a project this winter. My uncle and i are redoing it for my lil sister, it's only a 100 bucks so why not. We are also looking at putting a yfz450 into his 400ex frame.... ![]()
__________________ Suzuki Lt250R FMF pipe and silencer Boysen reeds and cage Bored .030 Looking at getting.... Paul turner pipe cool head porting by ??? wish i could get... +2 a-arms + axle New shocks! |
| ||||||||||||
| mmmm......not sure what the plans are for this winter??? I want to paint my frame, get a new exhaust kit for my lt, and/or tune it to work right. I also want to fit some ridin in there when the days are nice go out there and tear up the dry lakes!
__________________ 1988 Suzuki lt 250r FMF Gold Series Pipe & Power Core Silencer UNI Air Filter Blue Maier plastics DG Nerf Bars, Grab bar, & Front Bumper O'neal Handlebars 1986 Suzuki lt 250r 1993 Polaris 350 Utility quad PROJECT 300EX! "Hells Yes!" |
| ||||||||||||
| hmm.. the money that i dont have is supposed to be going towards college. but i might spend some on porting for the blaster which feels increasingly slower every time i ride it. an older sled would be pretty sweet too.
__________________ Pre-mix or Die 02 Blaster - Lots 79 John Deere Trailfire 440.. Yeah, it's got a UNI ![]() E2S militia member |
![]() |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
| |
All times are GMT -4. The time now is 03:48 AM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Credit Counseling | Xbox Mod Chips | Credit Cards UK | Ringtones | Buy Anything On eBay
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com










































... But most likely we'll prob have the buggy out pullin a couple sleds, or intertubes. We used trucks last year, so we're gonna find out if the buggy will pull it any better. You guys should try that, sled riding 50 to 60 mph on a tube behind a truck. Talk about some g force on the whips.. it's a lot of fun though.


go out there and tear up the dry lakes!
Linear Mode
