Best Drag Pipes

420bigbore · #1 (**permalink**) 11-24-2005

I'm at the stage at buying a set of drag pipes. I want maximum power & performance. Which of these would be the best: RDZ Drag pipes, CPI Bigbore Drag Pipes, Grand river racing Drag pipes or Shearer Drag pipes?

flotek · #2 (**permalink**) 11-24-2005

the best pipe really depends on your porting specs ,but if it was me.. id get 2 out one side shearer chromed drag pipes if the porting could warrant

ONLY2STROKES · #3 (**permalink**) 11-24-2005

yes,poting and pipe selection are crutial...some people actually build the engine around a set of pipes. another co. you may want to check is power pros. i've heard good things about them too.

420bigbore · #4 (**permalink**) 11-24-2005

I have stage 2 port job with a 420bigbore kit, running on 34mm carbs.

flotek · #5 (**permalink**) 11-25-2005

Quote:

Originally Posted by 420bigbore

I have stage 2 port job with a 420bigbore kit, running on 34mm carbs.

production shearer inframes then

420bigbore · #6 (**permalink**) 11-25-2005

Thanx, but would there be any way i would be able to get some out to frame pipes?

370banshee · #7 (**permalink**) 11-25-2005

well you gotta find out what youir porting really is..... stage 2 stage 88 who knows what that really is ya know.... you need to runa degree wheel on this thign and see exactly what your working with.. then have shearer or power pros build youi some custom pipes to work great with your porting....

Smkmup · #8 (**permalink**) 11-26-2005

I'm pretty happy with CPI's but I dont have any other drag pipes to compare them too.

BlueDiablo · #9 (**permalink**) 11-26-2005

I'd go shearer. I've heard and seen plenty of examples up at BBDR. Does anyone know the name of the company where you set your engine w/ carb reeds etc. and they custom make the pipe for best H.P.? Ive heard of this company but i dont know the name. its like a $600 setup for a blaster or so ive heard. Can anyone help me out?

flotek · #10 (**permalink**) 11-26-2005

Quote:

Originally Posted by mowery701

Does anyone know the name of the company where you set your engine w/ carb reeds etc. and they custom make the pipe for best H.P.? Ive heard of this company but i dont know the name. its like a $600 setup for a blaster or so ive heard. Can anyone help me out?

Matt shearer does this and its probably about half that in cost ,hes considered the top 2 stroke pipe builder in the country , angry5:

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode