small hole in pipe

[quadaddict14]

the pipe on my LT has a really smaal hole in it and its leaking all over the place is there any way i can fix it plus its leaking at the spot where it connects to the muffler can seal insteadof replacing the connector because im extremely low on $$$$$$$$$$$$$$$$$$$$

[suzuki11]

for the pipe just weld it and for the muffler use some high temp silicone pack lots of it i did this for my lt and it worked great

[250rrunner]

can you use some jb weld? just an ideal

[369DuneBunny]

there's heat stickers too. they are like duct tape but resistant to heat. and you can get them in all different sizes. i dunno if that would be strong enough tho

[lvwireman]

jb weld then a heat sticker strength and good looks what more could you ask for

[climb any hill]

Heater Hose & Clamp with High Temp RTV under it should seal the pipe.
JB Weld should be good enough on the Silencer. Give us status on this fix ok!

[honda250r]

no jb weld it would probably burn off from heat and look ugly just weld it up and if you dont have a welder take it to a welding shop and they will weld it up probably cheap and it would be a perminant fix

[kxrider]

no u can use jb weld with tha heat but tha problem is like my kx i jb welded tha pipe and tha oil in tha pipe started to contaminate tha jb weld and it will chip off