TRX BOTTOM END with CR CYLINDER ?

Carnage · #1 (**permalink**) 05-31-2006

What's going on 2 stroke fans !!!

OK, this has prob been coverd before, but can i adapt my TRX bottom end with a CR CYLINDER ? and keep my trx head ? What work's with what ?

IT TAKE'S 2 STROKES TO THROW A PUNCH !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

2 Strokes for life !!!!!!!!!

terboed · #2 (**permalink**) 06-01-2006

thats perdy much a negitive. all the cr cylinders that could work were powervalved. the powervalves on these cylinders were opperated by a gear running off the crank and linkage running from the case through the cylinder. there are lots of aftermarket cylinders out there for the trx. look into one of these.

RCDRIVER · #3 (**permalink**) 06-01-2006

http://hometown.aol.com/flys4pnuts/index.html

terboed · #4 (**permalink**) 06-01-2006

wow, thats alot of work to make the powervalve work correctly. you could just buy a pv big bore jug and be done with it just by bolting the cylinder on and you would have more power than the cr cylinder by doing so.

Carnage · #5 (**permalink**) 06-01-2006

Quote:

Originally Posted by RCDRIVER

http://hometown.aol.com/flys4pnuts/index.html

WICKED !!!!!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode