Removing powdercoating...

[sniperd]

Recently i have been wondering on how to remove the powdercoating on some parts of my banshee.

My first attempt at this was removing the PC off my shifting(foot) lever.

It was black and i used several methods of removing the PC but none of them worked well and i mostly ended up sanding/using a dremel but this caused it to be rougher then i wanted.

Does anyone know of a good way to remove the powdercoating chemically or so?

Im debating removing it from my stock head and handlebars and polishing each of them...


Also, Ive seen a write-up somewhere on someone using an aircraft remover on a banshee head i believe and polishing it. Anyone seen this?

[Kane]

Dads Stripper. Wallyworld and Home depot sell it. About $20 a gallon. Works in seconds, even on PC. The quickest method is to skuff the shiny surface a bit to allow the stripper easier access into the PC.

[sniperd]

Originally Posted by Kane

Dads Stripper. Wallyworld and Home depot sell it. About $20 a gallon. Works in seconds, even on PC. The quickest method is to skuff the shiny surface a bit to allow the stripper easier access into the PC.

Sweet, i guess it'd be in the paint departments? ive looked through wally world and havent seen this stuff...

Thanks!

[Kane]

Yup,,,,right there in the poly and stain aisle.

[!fatzillalt500r]

Black beauty or media blasting wrked on old plow blade I bought and re coated and sold like it was brand new..ya couldn't tell the difference

[climb any hill]

I remember that post here on Aircraft Paint Remover purchased at Walmart. There was some before and after pix. Those parts looked chrome when done with strip & polish.