Banshee Top Speed

[banshee balla]

hey guys just wondering what is the top speed on a stock banshee??

and do you guys have an estimated top speed for my shee with the following upgrades??

MODS:
Shearer Inframe Drag Exhaust
Airbox Elimnated w/ dual K and N's
Dune Port and Polish (Eviltwin)
Milled Head (Eviltwin)
Lightened Flywheel (Eviltwin)
Ricky Staror Adjustable Timing Plate (+5 degrees)
33mm keihin pwk carbs
v-force reed valves....

[Nick@LSR]

i think stocl is around 70-73...not sure about the speed on your now, What size sprokets are u running on there now???...Nick

[erik6767]

id say somewhere in the range of 89-92 stock and with your upgrades probably around 113-117mph

[Nick@LSR]

dont wanna start a pissn match here or hi-jack ur thread shee balla but Erik6767 ur #'s are a little high, take a look at the Shee VS Zilla thread in the racing section about the stock Shee MPH, 89-92 is a little high...Nick

[erik6767]

my stock shee runs 96mph actuallly groves187, i did some minor mods tho like cut air vents in the head pipe and drill holes in the silencers as well as new handelabars which weigh like 137grams less then the old ones. so im up around 100mph now

[Foshezy]

hahaha holyshit, id have to see it to beleive.
stocks about 71ish or 2ish.... ask the bigdogs on here theyll tell ya
but shit, a stock banshee is not going to go really any faster with things like a pipe and surely not handle bars or cuts in teh air vents, ... Mods like your pipes and such will alwow your engine to hit the speeds quicker, it still revs just about as high and if you continue to push your revs as fast as theyll go without proper mods thats a good way to blow your engine... A good way to look at it if you want speed, is to build the power within the engine and upgrade your sprockets gearing to manage the power without loosing acceleration or having to rev too high and blow her up....get a shee to rev much faster your gona be facing some problems.

I usualy loose around a pound after taking a shit, u cant tell me im gona gain like 30mph

[RagunCajun]

you could always get something with a speedometer like a car to run on side of you to clock it.

[Foshezy]

oh and haha, i dont wana start WWIII with you, but a twin 350 actualy means that it has a total of 350cc of the 2 cylinders.. you dont double it.. i guees if you wanted to you coudl say twin 175cc (350cc)

[Smkmup]

A stock shee does around 70 mph....We need to know more about your shee to help you out Mike...Like gearing and tire size...

Heres a calculator to help you out...

http://www.everything2stroke.com/resource/banshee.php

I'll also have a radar gun up at silver lake so we can clock you across the dunes...

[Kane]

Yep, mine with pipes and K&N filter, reed spacers and no box lid does about 72 tops, flat out full throttle on a level tar road. Thats with a trail tech speedo.