1992 wr500 info or specs

[wr500stroker]

anyone got any info on the wr500 or a spec sheet or a place were i can find it

[MX86]

what kind of specs ya want?

[wr500stroker]

i wanna know everything about the bike

[wr500stroker]

anybody got any inside on were i can find some info

[wr500]

Ok my friend, here we go:

Model Code Number: 4AA1

Engine Starting Number: 4AA-000101

Dimensions:
Overal Length: 2.205mm
Overal Width: 845mm
Overal height: 1.270mm
Seat height: 985mm
Wheelbase: 1.505mm
Ground Clearance: 370mm

Basic Weight with oil and full fuel tank: 121.8Kg (269lb)

Displacement: 487cm³
Bore X Stroke: 87X82mm
Over 0.5mm: Real cc:493cm³
Over 1.0mm: Real cc:499cm³
Over 1.5mm: Real cc:504cm³
Over 2.0mm: Real cc:510cm³

Compression Ratio: 6.64:1
Premix:24:1 Yamalube or 20:1 generic non-sintetic
transmission oil: SAE 10W30
Periodic change:0.75L
total amount: 0.80L
Fuel Tank Capacity:13.0L (2.86 Imp gal, 3.43 US gal)
Fuel Type: Premiun Unleaded, octane number of 95 or higher
Carburetor: VM38SS / Mikuni
Spark Plug: B8EG / NGK - Gap: 0.5~0.6mm
Secondary reduction Ratio: 50 / 14
Caster Angle: 28º15'
Trail:128mm
Tire sizes: (F) - 80/100-21; (R) - 120/90-18

Wheel travel: Front: 300mm - (11.8in)
Rear: 310mm - (12.2in)
Front Sring Rate, STD: K=3.9N/mm, 0.39 Kg
Optional:0.38~0.40
Rebound damping force adjustment: On top of fork / 20 clicks / STD:6 clicks out
Compression damping force adj.: botton of fork / 20 clicks / STD:8 clicks out
Oil capacity (each fork leg): 505cm³
Oil level: 120mm (from top of inner tube fully compressed without spring)
Extent of adjustment: 75mm~130mm
Oil Grade: 01
Front fork top end: Zero mm

Rear Sring Rate, STD: K= 48.0N/mm, 4.8 Kg
Optional:4.6~5.0
Rear Shock Rebound adjustment: lower adjuster / 20 clicks / STD:8 clicks out
Rear Shock Compression adj.: upper adjuster / 20 clicks / STD:11 clicks out
Rear shock enclosed gas pressure: 1000 kPa (142psi)
Min.~Max.: 100psi ~185psi

Front Rim size: 1.60X21 / Aluminum
Rear Rim size: 2.50X18 / Aluminum
Drive Chain: 520V6 / DAIDO
Number of links: 117 links + Joint
chain slack: 30~60mm
Ignition timing: (B.T.D.C.) 1.9~2.1mm / 16º / 2.000rpm

Well, I hope that helps.