| | |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
08-15-2007
| ||||||||||||
| ||||||||||||
 CR250 ignition question Does anyone know what years for the cr ignition are compatable with the 250r. Is it 97-01? I know you have to buy the adapter plate from ESR. Thanks for the help
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm   Never argue with an idiot. They'll just drag you down to their level, and beat you with experience!      |
| Sponsored Links |
| |
|
08-15-2007
| |||||||||||
| |||||||||||
| yep, 97-01 |
|
08-15-2007
| ||||||||||||
| ||||||||||||
| Thank you very much.
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
08-15-2007
| ||||||||||||
| ||||||||||||
| Do you know if you have to run a lower heat range plug with this setup
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
08-15-2007
| ||||||||||||
| ||||||||||||
| I would run 00 or 01, they are digital and the others are not. B8 whatever you run will be fine but you may need to jet up. |
|
08-15-2007
| ||||||||||||
| ||||||||||||
| Well I can get one from a 98 real cheap. How much of a difference is there between the 2
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
08-15-2007
| ||||||||||||
| ||||||||||||
| Does anyone know
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
08-16-2007
| |||||||||||
| |||||||||||
| it should work fine |
|
08-21-2007
| ||||||||||||
| ||||||||||||
| I know as far as just going to the CR ignition the smaller diameter flywheel should yield a quicker revving motor, no matter what year. I wish there were some dyno charts out there comparing the new and older ignition maps... |
|
08-21-2007
| ||||||||||||
| ||||||||||||
| A 98 will work but like I said its not digital, the rest of the choice is up to you. Personally I run a CR for a lot more than the small flywheel but to each his own. |
|
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT -4. The time now is 01:00 PM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Mortgage Calculator | Mortgages | Buy Shares | Credit Card | Problem Mortgage
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com
