Any one got esr reeds

Bad Ass Honda 250r · #1 (**permalink**) 05-10-2008

i would like to see what the intake side of the reeds look like, the side thats closest to the carb... i would like to see that but i cant find any pics on the internet....

all250r · #2 (**permalink**) 05-10-2008

See if this works.

flotek · #3 (**permalink**) 05-10-2008

bad thing is the9esr) dont make them anymore and the replacments are hard ot find ,they will even admit the vforce are the way to go

all250r · #4 (**permalink**) 05-14-2008

One thing the ESR cage has going for it that the v-froce doesn't is flat surfaces. Each company has it's flaws in new cages from the manufacturing process that need to be corrected. I have two new v-force cages on my bench now with a 2 and a 3 both having light shining under the reeds. The 3 is very bad. The ESR cage has some sharp edges and flat spots that should be radiused but the reed surfaces are flat. I'm planning to dyno the cages side by side before and after correction and see if I can draw some quantitative conclusion. Matching a boot can be a challenge with each cage too. I've already had to report the cage ESR sent me for their cage...