350 pv on stock clutch

[catch me if u can]

will a stock clutch handle the power of a 350pv if it cant what would be the best clutch to put in it

[atcsteve]

Use a hinson,or a override if draggin!

[Bad Ass Honda 250r]

ya a stock one will never hold up imo.... you will have to get some damn good springs to make it hold... i dont even buy springs from hinson or anyplace like that.... i just go to the local autoparts store or hardware store and get some get some springs.... i would get some springs that are small and just barely fit over the inner hub, then get some bigger springs that fit over the small springs but inside the outer hub, so you double up the springs.... ive seen it done once and it help up well. im gonna try it next time i have mine apart (which wont be long i have to put a counterbalencer in mine)

[morse250r]

i ran barrnett dirt digger with cr 500 springs no problem at all just took them out and put stock clutches and springs in my direct drive lock out i have heard its hard to beat stock so im trying them out