| | |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
06-02-2008
| ||||
| ||||
 Ahhhh ! so today for the first time my bike starts being an ass it loaded up on so much oil i filled the entire trail with smoke now it does it every time so i switched the plug to a r plug and its no better i leaned out the gas a bit more and no help !!! it doenst evan smell like two stroke it smells like tranny oil but it is coming form the pipe .. at the maifold was just dripping oil outta it on to my case  i have no idea why i run a 40:1 mix and its never done that any ideas before i tear it apart     |
| Sponsored Links |
|
06-02-2008
| ||||
| ||||
| Sounds like a bad crank seal. Good news is you dont have to split the cases.
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm   Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
06-02-2008
| ||||
| ||||
| AHH cool deal i will do some research on how to fix it .. that all it could be ? |
|
06-02-2008
| ||||
| ||||
| Really you dont even have to drain the oil. Just prop it up on its side, take the clutch cover off. Remove the clutch and basket and there it is
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
06-02-2008
| ||||
| ||||
| ok forget the reasearch i will pick me up a seal and get r done thanks fulltilt always lookin out for a bro when u get that r together give me a holler so we can shredd !!! |
|
06-02-2008
| ||||
| ||||
| Im not 100 percent positive thats it without seeing it but thats what it sounds like to me
__________________ 86 Honda 310R Power Valve Paul Turner Eliminator pipe 39mm Sudco racing carb 215psi 110 octane 310esr p/v Ported by Neil at C-Leigh Racing +4 Durablue axle +2 Burgard A-arms 87 Quadzilla Lonestar custom swingarm Lonestar axecaliber axle Lonestar steering stem Powder coated frame Custom Paint 42.5mm mikuni Alky carb (soon to be 48mm Packard Lectron) Marvin Shaw suspension LOTS OF CHROME Trinity Drag port ( I know its Trinity, but do you want to race it ?) CPI oof drag pipe am I forgetting anything? hmmmm Never argue with an idiot. They'll just drag you down to their level, and beat you with experience! |
|
06-02-2008
| ||||
| ||||
| noo problem i will check it out sounds easy enought to do so why not ya know ?if it wasnt that then hey dont gotta worry bout the crankseal plus have been doing sone real hard riding latly wanna see how shes doin in there anyways somked my first 450r today won me fifty bucks so im good to go hahah |
|
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT -4. The time now is 06:26 AM.
Powered by vBulletin® Version 3.7.1
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Car Credit | Personal Loans | Xbox Mod Chips | Babb Fest | Mortgage Calculator
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
Copyright 2005 everything2stroke.com
