ETon 90 Help

[SandGeek]

My uncle bought an ETon 90 for his Granddaughter (My cousins little girl). It runs good but when it sits it is a bitch to start. Its sat all winter and they have a sand trip scheduled in a couple weeks so he gave it to me to dink with. I got it all cleaned up and back together but I have a couple of Qs.

Has anyone ever caped the oil injector on one? What is needed? What ratio do you mix the gas afterwards?

Keeping the injector in tact, what is the best oil to use in it?

The verbage on the Battery is a little skewed, I am assuming this is a 6v system?

I am guessing the caster sitting in the little carb is behind the starting problem, any tips/tricks to curing this?

Thanks for all the help!
sg

[atomicsaladbowl]

try cleanin ur carb, that should make it start easier, when u take off the oil injector just take off all the hoses, and if u want go into the case and take out the pump, but you dont have to do that, then just run a regular straight line from the tank to the carb (duh) then mix it like i would guess for a 90cc two stroke somethin like 40:1 mix with castor 927 premix oil, should be all set (pm me for other Q's)

[awames76]

the battery is 2.2 v per cell, that is 3 cells is 6 v and 6cells is 12 v, 1 cap per cell, count the caps and u can tell if no caps then take a light and look through the battery and look for the cell walls and count the cells