just bought a ktm 125 clutch problem help

smashygadge · #1 (**permalink**) 01-29-2008

well i have just got a 1996 ktm 125 sx
when i bought it it seemed fine . i left the bike 2 week got it running
then had problems putting the bike into first gear
and then when it does go in gear the bike revs but dosnt wanna move forwards
any help appreiciated...................................:bl ob1:

ROACHIE · #2 (**permalink**) 01-29-2008

look for the obvious first...check out the clutch plates and spacers make sure they are in good condition and make sure(i think 96's had hydraulic clutches)it has fluid and tighten down the springs on the pressure plate the whole way and if all is well and it still dont work get a new clutch

ROACHIE · #3 (**permalink**) 01-29-2008

either that or you have a stripped out 1st gear

smashygadge · #4 (**permalink**) 01-30-2008

yep thx for the post
i stripped clutch and found the friction plates have nothing on them
so i have ordered a new set hope it works will let u no
thx alot

ROACHIE · #5 (**permalink**) 01-30-2008

your welcome

atomicsaladbowl · #6 (**permalink**) 02-05-2008

http://www.youtube.com/watch?v=YkFrtt79T7k refer to my video for installation