all i need

[rcom]

Alli need is a new head gasket and a clutch cover gasket. and i could tell you how good my stage 3 port job runs. does any one know where i can get a cheap gasket set or just those gaskets from?

[Joelt250r]

no i don't but , do what i do if in need that bad , gasket paper from a near by store or i've used my old had gasket with a piece of like cardboard from a cereal box on each side of the old gasket i had and it didn't leak . . . But that was just for testing "" around the yard stuff"" i did it on a 310 cc Lt 250 you just have to be able to cut straight . . .

[Duneman101]

i would just get on ebay and buy some cometic gaskets then you will have some sitting around if you ever need them again....the cereal box thing doesn't sound like a good idea to me....so just save yourself the risk of a blow up and waite for the real thing....

[RichM1983]

Here check this out. http://cgi.ebay.com/ebaymotors/88-92...QQcmdZViewItem


The seller has kits for other years. I have got stuff from them. Good to deal with.

[sblt500r]

the K + S gasket kit are the cheapest you'll find. i have also used them alot, with good results. but i don't like the 500 top end gaskets. an oem head gasket and clutch cover gasket would cost near or over the price of that complete kit.

[nd4speed]

I like the K&S stuff. The base gasket looked like the OEM one. Cometic did not.
Magic Racing sells just the clutch gasket for like $10.

[rcom]

i hate k&S