Getting A Little Slow

[evil_stroke]

where can i get a copper head gasket...

[burgiebird]

YOU CAN GET ONE FROM TUDOR'S PERFORMANCE (YOU CAN GET HIS NUMBER BY GOING TO WWW.QUADZILLATHON.COM AND CLICKING HIS LINK) I ALSO USE A FLEX STEEL BASE GASKET. YOU DO HAVE TO USE A SEALANT WITH THESE GASKETS, I RECOMMEND 3 BOND 1104, BUT A FEW OF MY FRIENDS USE RED RTV SILICONE BECAUSE IT IS EASIER TO CLEAN OFF THAN THE 3 BOND 1104, HOWEVER I BELIEVE I GET A BETTER SEAL WITH THE 3 BOND. YOU SHOULD NOT NEED TO HAVE ANY MACHINE WORK DONE UNLESS YOU HAVE A WARPED HEAD.

[lt250racer]

Im sure Cometic gaskets can help you with any gasket needs.

[evil_stroke]

Originally Posted by burgiebird

YOU CAN GET ONE FROM TUDOR'S PERFORMANCE (YOU CAN GET HIS NUMBER BY GOING TO WWW.QUADZILLATHON.COM AND CLICKING HIS LINK) I ALSO USE A FLEX STEEL BASE GASKET. YOU DO HAVE TO USE A SEALANT WITH THESE GASKETS, I RECOMMEND 3 BOND 1104, BUT A FEW OF MY FRIENDS USE RED RTV SILICONE BECAUSE IT IS EASIER TO CLEAN OFF THAN THE 3 BOND 1104, HOWEVER I BELIEVE I GET A BETTER SEAL WITH THE 3 BOND. YOU SHOULD NOT NEED TO HAVE ANY MACHINE WORK DONE UNLESS YOU HAVE A WARPED HEAD.

that link don't work...

[SnowZilla]

try this link for tudor's:
http://www.tudorsperformance.com/tudors_new_002.htm

You can also get the copper head gaskets from Q as well as the flex base gaskets. I just got a set.

By the way, I have read that ThreeBond 1104 has been discontinued due to hazardous chemicals (lead). I think ThreeBond 1194 is the direct replacement just in case you can't find 1104 anymore.