Picked up a new toy

[ReeperLT500]

It's a 90'. Everything stock but a pipe and exhaust. Needs some minor things(axle bearings, kick starter seal, and new seat cover). But it pulls pretty hard. Harder than my worked LT250(my 250 would outrun a stock shee w/ a reed spacer). Any other zilla owners out there that can give me the do's and don't for these monsters? Thanks.

[370banshee]

nice zilla

[sparkzilla]

Man that is a sweet ride.
#1 Gently bring the piston up to tdc and it will start right up. If you just kick it from any where you will kick your brains out.
#2 rule loctite is your friend!!
#3 run the right plug. NGK B8EGV (yes they are a little higher bit it is worth it)
#4 most important HOLD THE F*CK ON cause it's a wild ride!!

[ReeperLT500]

Originally Posted by sparkzilla

Man that is a sweet ride.
#1 Gently bring the piston up to tdc and it will start right up. If you just kick it from any where you will kick your brains out.
#2 rule loctite is your friend!!
#3 run the right plug. NGK B8EGV (yes they are a little higher bit it is worth it)
#4 most important HOLD THE F*CK ON cause it's a wild ride!!

I did notice that if I kick it anywhere my foot hurts the next day. But if bring it to the top of the stroke it starts right up. Weird. Right now it has a B7EGV. Is an 8 a hotter plug? Thanks for the advice. -Mark

[elgoldito]

Originally Posted by ReeperLT500

It's a 90'. Everything stock but a pipe and exhaust. Needs some minor things(axle bearings, kick starter seal, and new seat cover). But it pulls pretty hard. Harder than my worked LT250(my 250 would outrun a stock shee w/ a reed spacer). Any other zilla owners out there that can give me the do's and don't for these monsters? Thanks.

hi do you still have your 500lt if so how much you want for it.contact me 215-833-3946.

[92rslt1]

AGAIN, 3 YEARS OLD !! theres one on ebay BUY IT NOW 2700