This was probably the best performance mod for under $400, not only is it a great mod it is easy to install. With this mod you will notice faster revs and higher revs. Not to mention being able to switch powercurves to adjust your banshee to the style riding you do. The installation is as quick as uninstall the stock CDI install the new one and plug it in. The hardest thing is finding a good place to mount the switch. It is recommended to not extend the wires on the switch. I mounted mine to the rear bumper with a couple zip ties. So when I want to change it up whether I am drag racing or hill climbing I can just lean back flip a switch and I'm ready to smoke some 4-pokes.

One major issues that I ran into was the extra wires that I figured were harmless. Well they got wet and the shee seemed to have the TORS feeling where it won't rev. Easy solution for this is to get some shrink tube and some electrical tape. I have not had any issues with it shorting out since.

All in all this was a great mod for the banshee. If you have a modded banshee you need to get this it will advance the timing and increase your spark. I noticed a much brighter spark with the DYNA installed. If you are looking for a fast easy to install mod that will make your banshee perform a lot better this is the mod for you.

did you happen to get some dyno plots before/after for this ignition?

I didn't there are no Dyno's around me that I can do it at. What it does is advance the timing on the fly with out using the flywheel keys. Also it gives a much stronger spark. I would say for the money and easy of install it is a great add on

dynoed one with custom curve, nothing to brag on.

got mine used to its not to bad but i wouldnt buy a new one.

get a nology coil for more spark. imo

That's complete product. CDI ignition system include interrupt shifter,etc IMO but ,,,,, sadly that toy not imported in here.