Banshee stroker mods

[Finkeracer]

I'm just about to install a +5mm long rod, +4 stroker crank in my banshee. I'm going to use a spacer plate and standard pistons in this engine. Do any of you guys have and suggestions as to how I can get most out of this setup, as in porting, timeing ect.? It already has a mild port job, v-force reeds, 35mm PWKs, vortex ignition and T5s. I'd really appreciate any advice you could give me. Thanks

[Finkeracer]

Sorry, I forgot to say this Banshee is used for desert racing and a little motocross.

[Bkabina]

You should send it to Jim at Passion racing.He has an awesome set-up that would work great for what you are talking about.Tell him Steve sent you.

[369DuneBunny]

yeah, passion ported cylinders are so friggin clean it 's insane. . . that dude is like a machine, put two jugs next to each other and it's a mirror image. . .

um if you do get more port work done with that stroker you could get some 38mm pwk's or pj's i forget but i think it is the pwk's. . . and a shearer pipe. . . you have to get intakes too with the carbs ( but you prolly figured that).. .

i know eviltwin on here can shave your flywheel and cut your head for a fair price. . . and yeah, advance the timing too, not sure how that works, like you do sumpin with the degree key. . . i might be wrong on that last one. . .

[369DuneBunny]

oh and along with the carbs you have to get a different throttle cable too. . .
you might even need to buy a billet basket because i don't know if a stock one won't get chewed up. . .