ofna ultra lx comp problem

[mx47blue]

when I pull the trigger on the radio down to the full throttle position it goes to the idle position. how do i fix it?

[RCDRIVER]

your problem is that the throttle channel is reversed on your radio and to fix it There should be a little switch on your radio that says TH beside it change it from where it is now to the other position and you should be good to go .
Jeff

[mx47blue]

wen i do that the brakes dont work

[RCDRIVER]

dose the throttle work that way ? if it dose then you will need to ajust the linkages . To do that set you throttle trim to 0 with the trim at 0 the throttle should be closed if its not you will have to take the servo horn off the servo and turn it so the throttle is closed . After you have the throttle done then you can check the brakes again and if they still done work they will need to be ajusted by moving the little stops that are on the linkage , i can't tell you what way to move them because i don't know if that buggy has push or pull brakes . I hope this helps . and one more question did you buy the buggy new or used .

Later , Jeff

[mx47blue]

it is brand new it just arived to my house on sunday

[mx47blue]

what kind of rc do you have?

[mx47blue]

i think i fixed the problem. now i just have to drive it, once the dumb rain stops!!!

[mx47blue]

does any one have the ofna ultra lx comp

[RCDRIVER]

I have a XTM 1/8 buggy ,XTM mammoth , kyosho mad force and a bunch of other ones and i just picked up a ofna ultra lx comp in a trade today and it looks to be a well made buggy

[mx47blue]

did you drive the ultra lx comp yet