anybody else from maine

[zoinks]

hi im new on here. didnt know where to introduce myself so ill do it here. im from maine and have been ridin for a while. i have a 2005 yamaha yz125 and a 2002 yamaha viper er. you can probably tell i love yamaha and 2 strokes. i do mostly trail riding with my bike and sometimes me and my buddies go and ride around some tracks. i might do some races this summer, not sure yet. anybody else on here from maine ?

[peter]

welcome to E2S zionks not from maine but have been there quite a few times since my grandfarther has a camp near rangley and the people on this site are helpful if you have questions.

[MaineExport]

I lived in Maine for 7 years or so... Portland, Lewiston-Auburn, Gorham, Westbrook, all over.

I also have a camp up in Palermo on Sheepscott Lake. We are planning to get a bunch of northeast E2S riders together this summer probably in New Hampshire... hang out in the general or off topic sections if you are looking for the most traffic on the site. The Banshee, Blaster, and LT sections are also pretty busy... not a ton of dirtbike guys around here though... we need more!! Welcome aboard!!

[wejibbaed]

I live in brewer maine and ride mostly pits, roads and other places that havent been shut down. im a hudge 2-stroke fan and allways will be. I ride a 03 shee that i plan on building this summer, and my buddy rides a 89 lt-250. theres a ton of info on here and after reading some i know i wont be using a 2 into 1 intake, reed spacers or boost bottle. I saw somewhere that a guy mated two CR-500 cylinders on a shee, and was wondering if there was any other cyl. that i could do this with? also saw an article of a polaris 400 top end on a 250-r bottom, you just needed to ream out the front stud holes, not shure about the piston. got some cool vids ill be posting soon.

[MaineExport]

Sounds good... welcome!

I've never heard of either of those cylinder swaps... but if you're good at fabrication I imagine it wouldn't take too much work to figure out.

Can't wait to see the Vids!