oil injection block off?

[ehall1]

i want to use pre-mix in our 02 250 trailblazer, so can i just put it in the gas tank and drain the oil injection tank without blocking off the injection shit ? thanks ahead

[370banshee]

nope you have to bypass he injector then you gotta fill the oil res on the engine itself up with 5w oil.. then you can mix your gas reg.. by oil res. on teh engien there is a oil cavity on teh engien.. red plug i believe..

[ehall1]

Originally Posted by 370banshee

nope you have to bypass he injector then you gotta fill the oil res on the engine itself up with 5w oil.. then you can mix your gas reg.. by oil res. on teh engien there is a oil cavity on teh engien.. red plug i believe..

dam that was quick. so first i gotta buy the block-off plate, install that then fill the resovoir wit 5w? how much oil do i first put in the resovoir cause i imagine theres no dipstick? thanks...... fill to bottom of hole were the plug is?

[370banshee]

i'm not 100% sure on teh exact amount or if my discription is 100% acutate.. i did the oil block off on a polaris 400xpress a few months back.. if they sell a kit s=just buy the kit it will explain everything.. i'm not much into buying those kits but....... this one i'm not to sure on.. try PMing go-blow-or-roll... he's an old skool E2Ser.. and also a polaris tech..

[ehall1]

Originally Posted by 370banshee

i'm not 100% sure on teh exact amount or if my discription is 100% acutate.. i did the oil block off on a polaris 400xpress a few months back.. if they sell a kit s=just buy the kit it will explain everything.. i'm not much into buying those kits but....... this one i'm not to sure on.. try PMing go-blow-or-roll... he's an old skool E2Ser.. and also a polaris tech..

will do. thanks chris

[BansheeDuner500]

Get the oil injecter block off kit from Hotseat performance. Its only like $15 and take 20min to do. i put one on my quad