oil injection block off

killfactorycustoms · #1 (**permalink**) 08-26-2008

im gettin ready to put my cyclone back together and i am trying to decide whether to try and build a block off kit or just buy one. Is it just a plate or what does it really consist of?

siderbox · #2 (**permalink**) 08-26-2008

lilredridenwood blocked off his 400 Scrambler. It's been a few years ago but I think is was just a plate.
You might throw a PM his way and see what was done.

bfulton620 · #3 (**permalink**) 08-26-2008

just buy one bro. its super cheap. got mine for 20 bucks and i did have to do any fab work....

Twistedtrik · #4 (**permalink**) 08-26-2008

Some of them are different. I have a brand new setup for a Trailblazer/Scrambler and it wasn't cheap. You have to plate it, and run a new cable also. The cable now is a split cable to operate the carb and oil pump where as the new kit has a new cable to eliminate the split cable.

atomicsaladbowl · #5 (**permalink**) 09-01-2008

whenever i take off the oil injector all i do is take off the oil tank thats it, what is up with this whole block off thing? what is it that you need to "block off"?

killfactorycustoms · #6 (**permalink**) 09-04-2008

talkin about removing the pump off the side of the motor

tughill283 · #7 (**permalink**) 09-05-2008

if you dont want to spend money just plug the lines,unhook cable and remove tank .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode