Transmition Fuild Everywer!!!!!!

[Aussie Bloke]

i have just fixed my shee and i took it out for a good ride and i go and load it back onto the trailer and a whole shit load of trasmition fluid is dripping out!!!!

i traced it to a blown bearing seal were the sprocket connects to the motor!!

the bearing is ok apart from its seal and i hadn't lost any oil when i was riding only wen i tipped it onto its side it droped it all.

no damage is done to the bearing housing either

WTF happened any ideas or suggestions!? how much will it cost to fix???
has this ever happened to any one else!??

cheers fellas

[2002shee]

You say you just fixed it, did you have the side cover and sprocket off? Behind the sprocket is a collar that the seal seals against. Make sure that it is in good condition. To replace the seal is not expensive and is pretty easy. Just make sure to turn the collar as you slide it on so the lip of the seal does not fold in.

[Aussie Bloke]

oh ok yer i know wat your talking about!
yer i did fix it and it was running sweet so i took it tout riding and yer the seal blew so was pretty annoyed but yer thanks for that seems like a pretty easy fix eh?