Banshee Carrier. Please Help!

Smkmup · #1 (**permalink**) 07-13-2005

I'm Currently Restoring My Banshee And Am Have Trouble Removing The Carrier From The Axle. Is It Just The Bearing Holding It On Or Is TheRE A Clip I Cant See?

Thanks

CHAD · #2 (**permalink**) 07-13-2005

not too sure what your askin? you mean how do you remove the axle from the carrier?

Smkmup · #3 (**permalink**) 07-13-2005

Yes Exactly

CHAD · #4 (**permalink**) 07-13-2005

ok, Mine came with a durablue axle, but it should be pretty much the same. On the left side take off your wheel and hub. Then unscrew the axle nut and pull that off, if its been a while it might take some persuasion to get it off, I suggest having a rubber mallet with yah. there the nut was there will be a big clip, pry that off, then slide your sprocket hub off, and after that you should be able to pound the axle right out of the carrier.

Smkmup · #5 (**permalink**) 07-13-2005

I have my sprocket hub off already, but the carrier is like stuck

CHAD · #6 (**permalink**) 07-13-2005

yeah shouldn't be anything else holding that in there, I'd get a rubber mallet and knock it out, if you don't got that, get a piece of wood, hold it over the end of the axle, and hit the piece of wood with a hammer.

Smkmup · #7 (**permalink**) 07-13-2005

Sounds Good Thanks For Your Help!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode