performance question

[SQUIGGY]

I bought a head off ebay for my 88lt, and had it milled .020. My jug has a mild port job it looks like and I would like to know if I am gonna hurt my self or help myself by putting this head on? I am going to Little Sahara O.K. on the 28-2 and really don't need to blow it up before hand. So any feed back would help.

[ltracer250r]

Well first off i would make sure that the head isnt warped so you wont be sucking in coolant. But i think you would be fine running that head but make sure that you run a higher octane gas cause there is going to be more compression.

[flotek]

your safe..... be sure it is flat and clean though

[generallee]

Originally Posted by eviltwin

your safe..... be sure it is flat and clean though

is there any way to tell weather it is warped or do you have to take it to a pro

[tecateboy]

iv head put it on a peice of flat glass and you can tell that way.

[SQUIGGY]

thanx for the info, and ya the head is all good, I took it to the machinist that does work for the company I work for and I also checked it with a straight edge rule.