quadracer wheel pattern

[Bones91lt250]

i saw some rear wheel spacers on ebay that said they were for a quadracer 250 4 hole but they were 4on115. are the 85-86 not 4on130?

[mentally_ill_lt250r]

85-86 is 4 on 130

[Foxtrot7]

hey, I just bought new hubs for my 86 LT250R cause the guy i bought it from welded the hubs to the axle. Not sure why exactly, but the hubs I bought of ebay are the 5 lugs, Anybody know it they will fit my 86 axle or what size wheels i will need to get now?

[mentally_ill_lt250r]

theres a small chance they could fit your axle, if they are a 24 spline hub from a 87 lt250r. if its late 87 or 88 and up then their 26 spline and wont fit. if they do fit you will need rims that are a 5 on 130 pattern

[Foxtrot7]

i already have spacers on my old 4 lug hubs and nice ITP wheels so ill probably sell the 5 lugs and try and find 4 lug 86 hubs

[gh500]

I think i have a set of 85-86 hubs

[fufanu360]

i can almost guarantee the hubs are welded because the splines are stripped, if that is the case, then you need a axle or you can just leave it

[Foxtrot7]

i took the one off cause the weld was broke anyways and they looked good but the hub wiggled aroung a lot and seemed like it was too long for the axle

[Bones91lt250]

my 91 has 4 hole wheels on the rear. i think someone put an 87 axle on it and 86 hubs and wheels. will the axle fit all years? durablue list 85-87 then 88-92 whats up?

[mentally_ill_lt250r]

i think they list them that way because of the splines