works shocks

[IRISHDEVIL]

I dont know to much about these shocks but a buddy of mine is selling his off of his Warrier well they never got put on. Now will these work with an LT I think the front might but i dont think the rear will. Does anyone have any idea or know if these will work?

[rippinlt]

if its your friend i would just size them up first to make sure. Very highly doubt the rear would match

[IRISHDEVIL]

well he lives in cali and i live in AZ so alittle hard to try

[fufanu360]

well just get him to measure the eye to eye distance and then measure yours... if theyre within an inch they should work

[IRISHDEVIL]

I looked up the part numbers and both bikes use the same part number for both bikes so im good to go

[superevil]

the warrior shocks are shorter than the shocks on an 87 lt250r,i know this first hand,They may work on an 85 or 86 lt250r,but if you bolt them to a front end of an 87 it will lower it , I dont think the back interchanges

[gh500]

I have a set of works shocks from the front of a warrior on the front 87-92 racer you need different spacers to make them mount & they lower the front of the quad about an inch the shocks are only anout 1/4 shorter that stock length & they are a bit softer than the stock ones if you are jumping & will bottom out but for a plush woods bike they work great

[superevil]

Ha thats where i seen warrior shocks on an lt,good to see you on here gh500