key relocation

[IRISHDEVIL]

I want to relocat my key and dont know where to put it any suggestions or some pix of what you did.

[Blaster350]

I just removed mine all together. They are actually pretty worthless. All someone has to do is unplug it and they can start the quad. It only keeps the honest thieves away.

[SAVAGE420]

There basiclly uselessI just junked mine also after i hucked on some Pro-Taper bars.

But there are a few companys that make kits that relocate the key under the seat right before the gas tank.

I think RMATV has them.

[IRISHDEVIL]

Ill Check Them Out

[IRISHDEVIL]

NOPE rm DOESNT HAVE ONE AND I GOOGLED IT AND NOTHING SO ILL MORE THAN LIKELY JUST CLIP IT OFF. WONT I NEED TO CONNECT 2 OF THE WIRES TOGETHER

[SAVAGE420]

Yes..if you clip the 4 wires before the plug , just connect the 2 small wires together separate and the big ones together.
Or if you clip the wires right off before the clip put the 2 wires together.

[SAVAGE420]

Well god damn you you suck at google. So here is the "Hide a key" kit for the shee

http://www.kdcycle.com/partsdatabase.html?prod_id=985

Goes under the seat like i said.

Or if you like colored ones ... http://modquad.com/store/search_resu...rch=fromSearch

[SHOWTIME]

save your self the time and trouble. remove the key box. it looks better too.

[Blaster350]

I didnt have to connect any wires together on my racer. I just unplugged it at the bullitt connectors, and the wires are still dangling under my hood. IDK maybe my Racer has messed up wiring, but the key switch worked before.

[IRISHDEVIL]

Now when you say recer are you talkin about your Blaster or a LT250, because i have a LT