| ||||||||
![]() |
| | LinkBack | Thread Tools | Display Modes |
| ||||||||||||
| Does anyone think 23-7-10 is too tall for an LT250R. I found some Carlisle AT489's. Does anyone know if they would be any good? Is it possibly a front 4X4 tire? |
| Sponsored Links |
| ||||||||||||
| I run 23" front tires on my lt... They work fine for my purposes... they aren't quite as stable as the 21's I had before, but I really like them for the rocky and rutted terrain that I usually ride... |
| ||||||||||||
| i would think that it would be to much meat on the front..but i never ran a tire like that on a sport quad up front.. |
| ||||||||||||
| 21x7x10 should be the tallest tire you run on a sport quad. Any taller than that handles terribly and looks ridiculous. |
| ||||||||||||
| I run 23 inch holeshot xc's on my R. i've kinda got pretty used to em and they've held up to some rough riding since ive had it. I think the 23 inch tires are pretty big, but on some bikes they look ok if you want that gncc/desert racer look heres a pic of mine. the reason I got the little 18in razars in back is cause I had a blow out with my holeshots and had to run those razars as spares, and believe it or not I ended up riding with them tires on both the trips we went on there at LBL. them things actually aint half bad for the trails. just not the best when you hit some really rocky parts cause I bottomed out easy on the skidplate.
__________________ 86' honda 250R woods bike fresh motor as of sept. 9th 08' esr trx 5 pipe and silencer 38mm air stryker carb stock cyl. with 68mm wiseco piston (86') cr thin head gasket 180psi compression (stock head) 88' hot rods stock crank with spacer plate vforce 3 reed valve 01 cr250 ignition system +4 axle 13/38 gearing durablue lowering strut maier front and rear fenders |
| ||||||||||||
| I run 22 inch Itp Gncc's on the front and 20 inch xtc's on the rear....I hate Itp tires lol. I wouldent buy anything ITP but that is what came with my bike when I got it, I Personaly Like 21 inch Razr 2's for the front and Either kenda Knarly xc's or razr 1's for the rear.
__________________ 91/92 frame,fresh white powdercoat laeger swingarm laeger a arms lsr steering stem tag oversized bars asr tie rods durablue +4 axle and 1 year old oem rear hubs ported and polished 88 motor/cases were portmatched 1mm over bore 170 psi paul turner midrange pipe and fatboy2 silencer dg bumper/grab bar/nerf bars chassis skid and swingarm skid works dual rate front shocks/z400 rear shock front/rear stainless brake lines/new front rotors |
| ||||||||||||
| y do u hate itp lol? |
| ||||||||||||
| they never last very long, I am actually pealing chunks off the rear tires....half the tread is gone, and they are only 3 months old
__________________ 91/92 frame,fresh white powdercoat laeger swingarm laeger a arms lsr steering stem tag oversized bars asr tie rods durablue +4 axle and 1 year old oem rear hubs ported and polished 88 motor/cases were portmatched 1mm over bore 170 psi paul turner midrange pipe and fatboy2 silencer dg bumper/grab bar/nerf bars chassis skid and swingarm skid works dual rate front shocks/z400 rear shock front/rear stainless brake lines/new front rotors |
![]() |
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
| |
All times are GMT -4. The time now is 02:24 PM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Fast Loans | Xecuter 3 Mod Chip | Home Insurance | Loans | Free Mmorpg
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com















































Linear Mode
