| | |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
04-26-2008
| |||||||||||
| |||||||||||
 front end vibration? I'm getting front end vibration at speeds above 35. It gets pretty squirly. Everything is tight and straight. Any ideas?      |
| Sponsored Links |
|
04-26-2008
| ||||||||||||
| ||||||||||||
| what kind of bike we talkin about here?
__________________ 07 Yamaha yfz450 No more 2 strokes for now  |
|
04-26-2008
| |||||||||||
| |||||||||||
| 92 lt250r No camber adjustments? I got one wheel that is top out. |
|
04-26-2008
| ||||||||||||
| ||||||||||||
| Maybe the stock shocks are shot? Might be time for an upgrade! Air down a bit, should soak up some of the vibes.
__________________  E2S MODERATOR |
|
04-26-2008
| |||||||||||
| |||||||||||
| Actually the shocks are pretty damn good. |
|
04-26-2008
| ||||||||||||
| ||||||||||||
| When in the throttle do the vibes come on? acceleration or deceleration?
__________________ My bikes Foster Bike 00' Banshee (Shit my buddy don't ride it!) 84' FXE Shovelhead 72' Norton Chopper |
|
05-02-2008
| |||||||||||
| |||||||||||
| They come on at higher speeds(mid-high) during acceleration. |
|
05-02-2008
| ||||||||||||
| ||||||||||||
| I would check the front wheel hub bearings.
__________________ My bikes Foster Bike 00' Banshee (Shit my buddy don't ride it!) 84' FXE Shovelhead 72' Norton Chopper |
|
05-02-2008
| ||||||||||||
| ||||||||||||
| I would check the front bearrings, But it sounds like you need to ajust your alignment. This is easy to do if you have a carpender's Square. The stock shock arnt as bad as the earlier generations, but by no means real good. Also check where the tie rod ends bolt to the steering stem & hubs. If there is any play at all, it could cause this...
__________________ 1985 LT250R Quadracer Manufacture Date: 12-84 +8mm Hot Rod FloTek Drag/Dune port w/ Head Mod LA Sleeve STD Weisco Piston AAEN Pipe 1Dirracing Ported Reed Block w/ Secrets Keihin 39mm PWK Nology Pro Fire Coil & HotWires 7oz off FlyWheel Barnette Kevilar Clutch Kit UNI filter +2 +1 Chrome Burgard A-Arms +4 Chromoly Swingarm WORKS Fronts w/ Rezzys DuraBlue Rear Strut Billet Twin Row Carrier LSR Axcaliber +2 Axle & LSR Brake Hub "If your not scared, your not safe" |
|
05-02-2008
| |||||||||||
| |||||||||||
| Wheel bearings are new(just installed). I want to add that the vibration is strong, almost feels like if you stay on the gas you will be bucked. |
|
« Previous Thread
|
Next Thread »
| Thread Tools | |
| Display Modes | |
Linear Mode
| |
All times are GMT -4. The time now is 03:47 PM.
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0 Loans | Problem Mortgage | Mobile Phone | Secured Loans | Watch Anime
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.1.0
vBCredits v1.4 Copyright ©2007 - 2008, PixelFX Studios
Copyright 2005 everything2stroke.com
