Pro design Cool head Questions

[fasterblaster2002]

I have a cool head on the lt i just bought, and i am wondering a few things about it, and since i havent been able to get prodesign on the phone, i thought i would ask you guys.

1. What type of gasket dose this head use? Oring or regular?
2. How do you tell how many ccs the dome is?
3. where can you get gaskets for these if they require o-rings?

[fasterblaster2002]

does anyone know if viton o-rings are what cool heads use? i think i have seen them with different brands of cool heads.

[fasterblaster2002]

also, are oring gaskets reuseable?

[bfulton620]

oring gaskets are re-usable.... you should be able top tell if it an oring or not.. if its an oring, it will have an oring groove on the "head side" towards the outer brim. its not just any old oring though, iots gota be a certain material. they arent hard to come by though. find out what they recommend. dont know how to tell the cc's... i mean, i happen to have a "pharo arm"(million dollar measuring device), at work... witch can map out the dome, and tell you the cc's.... without that i wouldnt know? didnt the guy you bought it from tell you the cc's? you could possibly take a few rough demensions and run them by the guys at pro design, and they could tell you the cc's? but thats pointless if you cant get them on the phone? is the chamber hemispherical? round? if its simply round, you could proly find the cc's simply by measuring the center depth demension and cross referencing it with someone else?

[strokeittwice443]

if you take the head off and pop the dome out, look on the side of the dome. it should be stamped in the side what size it is.

[fasterblaster2002]

yeah i know how to tell once if have the head off..but i want to put it back together right away and not have to wait on a gasket...i strongly suspect it is a oring type gasket, so i will probably just take it off and see if they are reuseable. thanks for the info