Exhaust flange needed

RUN-A-MUCK · #1 (**permalink**) 05-01-2006

I need to find an exhaust flange for an 1988 LT250R DG muffler. I have the muffler, pipe and silencer, but not the flange and springs.

Can they be purchased? If so where?

Or does anyone have one they wan to sell?

Thanks.

jet99 · #2 (**permalink**) 05-01-2006

I need one to for an 1986....i bought a fatty and it dident have one...

razrbakcrzy · #3 (**permalink**) 05-01-2006

If you have the stock pipe you can cut the flange off of it and weld on the correct size dia. tube and a couple of washers to hold the springs and there you have it and yes you can buy the exhaust springs from your local stealer! You could also just go down to your local hardware store and look through the spring selection until you can find one that will work for you.